Revolabs setup guide Revolabs Single Channel System Sony PCS-1 Setup Guide

Revolabs Single Channel System — Sony PCS-1 Setup Guide

This setup guide will guide you through the steps needed to properly connect a Revolabs Single Channel System to a Sony PCS-1 video codec.

Note: It is important to carefully follow these instructions in order and completely. Otherwise your Single Channel System and/or the video codec may not function properly. Please read through these instructions completely before proceeding. Contact Revolabs technical support if you have any questions.

Requirements for connecting systems:

1.Revolabs Single Channel hone System

2.Sony PCS-1 video codec

3.QTY 1 07-STEMIC-PPP Line-to-Mic Adapter Cable*

4.QTY 1 Female XLR—1/8” mono male cable* (i.e. Calrad 10-144)

* Optional Items