Revolabs setup guide Connecting the Cables, Configuring the Sony PCS-1 Video Codec

Connecting the Cables

1.Connect a Revolabs 07-STEMIC-PPP Line-to-Mic cable to the 2.5mm analog output on the Single Channel System.

2.Connect a female XLR-to-1/8” cable between the male XLR connector on the 07 -STEMIC-PPP cable and the “MIC 1” port on the PCS-1. Disregard the RCA portion of the 07-STEMIC-PPP cable.

1

2

Configuring the Sony PCS-1 Video Codec

1.Push the TOOLS button on the remote control

2.Select SETUP

3.Select AUDIO to MIC

4.Select CTE to OFF

5.Select ECHO CANCELLER to ON

6.Save settings