FLX & Avaya IP Office 500 Technical Note
Registering the FLX with the Avaya IP Office
Please use the FLX web UI to register the FLX with the Avaya IP Office.
1.IP address of the FLX.
a.If you are using DHCP in your environment, the FLX automatically receives an IP address. From the FLX handset, choose Menu and “System Info” (the symbol with the “i”) and select “About System”. The IP address (static or via DHCP) of your FLX is shown.
b.If you are using static IP, on the FLX handset chose “Setup” (the wrench symbol), “Advanced Setup”, enter the administrator password (default password is “7386”), enter “Network Settings”. Change “DHCP ON” to “DHCP OFF”. Then enter “IP Settings”. In this menu you can enter the IP address, Subnet Mask, and other relevant information. Once you have entered all information, select “Return”, and in the Network Settings menu select “Load Settings. This will restart your phone with the new network settings.
2.In a web browser of your choice, enter the IP address of the FLX phone. This will open the web interface for FLX. Enter the password (“7386”), and select “Administrator” in the right top of the screen.
3.On the left side, select “SIP Registration”. The following screen will show:
4.Enter the registration info for your Avaya IP Office:
Registrar – the Avaya IP Office IP address, in our example 10.1.1.1
ID – User ID for the User added to the Avaya IP Office, in our example 8100 Display Name – this can be any friendly name for the user
Username – enter the same User ID as above Password – the User’s password set in the IP Office.
4 P a g e
