Revolabs 85, 75, 95 MXP setup guide Connecting the Cables

Connecting the Cables

CONNECTING A REVOLABS FUSION TO TANDBERG EDGE 75/85/95 MXP VIDEO CODEC

1.Connect a Male RCA-RCA audio cable between the “Conf. In” port on the Fusion and the “VCR 1” port on the Edge MXP.

2.Connect a Male XLR audio cable between the “Mic Conf. Out” port on the Fusion and the “Mic 1” port on the Edge MXP.

3.Connect a Male RCA audio cable between the “Room Out” port on the Fusion and the Speakers.

Note: The speakers used for audio and video conferencing with this configuration must be connected to the Fusion for proper echo cancelation.