Revox M208 manual Automatic switch-off Ambient light Timeout Amb. Light

M208	Re:control
Automatic switch-off	Ambient light
[Timeout]	[Amb. Light]

The M208 has an automatic switch-off feature that extends the working life of the batteries. The M208 is switched on using an integrated movement sensor, which recognises each movement of the remote control and returns it to the operating mode that was active before the automatic switch- off. In a very quiet room, the mechanics of the sensor are audible, but this does not indicate a fault.

Through the Timeout Menu, you define the length of time from the last time a button was pressed or the last time the unit was moved, until the automatic switch-off. This timeout can be set to one of three values, 3, 6 or 10 seconds.

The Timeout Menu does not define the timeout for the backlighting. This is fixed and cannot be changed.

The brightness sensor is located at the lower end of the remote control, below the 0 button.

Using the Amb. Light function, you can define at which ambient brightness level the blue backlighting should be switched on. As well as the three brightness levels, the sensor can be deactivated through the Off setting. With the Off setting, the backlighting is switched on each time a button is pressed whatever the level of ambient brightness.

OFF: deactivated

Low: dark

Medium: semi-dark

High: bright

The brighter the ambient brightness setting, the shorter the working life of the batteries. The setting Off results in the shortest working life.

A-10