RF-Link Technology APW-1000 setup guide RF-Link, Package CONTENTS：, Function, Setup Guide

RF-Link

www.rflinkusa.com

QUICK INSTALL GUIDE Model: APW-1000

5.8GHz Outdoor RF Power Amplifier

1. PACKAGE CONTENTS：

Make sure that all units shown as below are enclosed, please contact your dealer if anything is missing.

1

2

1.-- APW-1000 Outdoor RF Amplifier *1

2.-- Waterproof Power Cable( 2 m) *1

3.-- Cable (SMA male, 25") *1

4.-- Power adapter (input: 120V DC, 60Hz, 9.7W output: 12V DC, 500mA) *1

2.FUNCTION

1-- SMA FEMALE ;RF Signal Input

2-- DC power input ,connect to power supply (12V~28V)

3-- SMA FEMALE ;RF Signal Output

1 Model:APW-1000 3

RF IN

RF OUT

DC IN

3. SETUP GUIDE

1.Connect transmitter antenna to APW-1000 (via "RF OUT).

2.Connect SMA cable to tranmitter (via "RF IN:).

3.Connect Power adapter(120VAC / 12VDC 500mA) to DC JACK

+	RF Singnal from	Model: APW-1000
	Transmitter
		RF IN		RF Singnal
		DC IN	RF OUT	to Antenna

DC JACK

4. SPECIFICATION :

Operating frequency range	5.0---6.0 GHz
P1dB	26 dBm
Power gain	18 dB typical
Match impedance	50 Ohm
Input VSWR	2:1
Supply voltage	+12 ~ +28 VDC
Supply current	< 380 mA
Dimension	125 mm * 80 mm * 40 mm
Operating temperature	-20 to +65 Ԩ
Storage temperature	-40 to +85 Ԩ
Waterproof Rate	IP 65

NOTE:

1.Keep the coaxial cable between the APW-1000 and Transmitter as short as possible.

2.Keep the coaxial cable between the APW-1000 and Antenna as short as possible.

3.Make certain all connections are tight.

4.Make certain all screws has locked on the cover.

2