Rheem 50 Gallon warranty Available in 50, 85 and 120 Gallon Tank-Type Models, System Sentinel

Heavy Duty Electric Commercial Water Heaters

Available in 50, 85 and 120 Gallon Tank-Type Models

￿6 KW thru 81 KW

Rheem-Ruud Electric Commercial Water Heaters are suitable for general commercial hot water applications and are also ideal for point-of-use installations. A single unit can be used as a booster heater to satisfy the hot water requirements of commercial dish- washers. A single temperature storage unit, when installed with a mixing valve, will supply two temperatures in food service establishments.

Construction Features:

208, 240,

277 and 480

Voltages

Surface Mounted

and Immersioin

Thermostat

Models

•System Sentinel –

immersion thermostat models employ an element diagnostic panel, utilizing light emitting diodes (L.E.D.), corre- sponding to the number and location of each heating element. This system monitors the on-off function of the electric heating elements.

•Long life ASME tank design – proprietary steel formulation with high temperature porcelain enamel to maximize corrosion resistance result- ing in a superior tank design.

•LIFEGUARD heating elements – separate screw-in type elements fea- ture a stainless steel outer sheath of INCO-LOY 840, surrounding a Nichrome wire filament, to resist water chemical corrosion and burn-out even in air or sediment…for long element life and long life performance.

Elements are directly immersed in the water for maximum recovery efficiency (98%) and are easily changed by sim- ply screwing new ones into the tank.

LIFEGUARD elements feature a three

(3) year limited warranty.

•Full port, full flow brass drain valve

•Minimal heat loss design –

85% of the tank surface area on all Rheem-Ruud Commercial Electric products are insulated with 3" of rigid polyurethane foam insulation providing superior insulating qualities. Unlike other designs, Rheem-Ruud Commercial Electrics can achieve 85% because of the unique compact layout of the heating elements. This results in heat losses less than the energy used by a 100 watt light bulb during a 48 hour standby period!

Certifications and Ratings:

®

(With Optional

Seal Kit)

•Efficiency – in accordance with ANSI test procedures, these models tested below the maximum allowable standby loss levels of ASHRAE Standard 90.1b-2001 (Part of the Federally mandated Energy Policy Act (EPact)).

Also exceeds energy efficiency codes of all states including California Energy Commission (CEC).

•Safety and construction – These products are design certified by Underwriters Laboratories (UL) to meet UL standard 1453 as electric booster and commercial storage tank water heaters. All models are North Carolina code compliant.

CERTIFIED FOR A 150 PSI MAXIMUM WORKING PRESSURE (160 PSI FOR ASME MODELS).

•Optional construction – ASME construction is available on immersion thermostat models.

Continued on reverse.