Medium Duty Gas Commercial Water Heaters
Available in 60, 75 and 100 GallonTank-Type Model
50,000 BTU/Hr. thru 80,000 BTU/Hr.
Construction Features:
Short
Heights
Small Jacket
Diameters
Greater
•Space saving design – short heights and small jacket diameters result in greater installation flexibility.
•Long life tank design – proprietary steel formulation with a unique coat of high temperature porcelain enamel to maximize corrosion resistance resulting in a superior tank design. Dual magnesium anode rods are installed for longer tank life.
•Foam insulation –
rigid foam insulation provides superior insulating qualities, improves efficiency and reduces operating costs. Our patented process of injecting foam into the insulating cavity adds additional durability and dent resistance to the heater jacket.
•Automatic controls – control system is designed to shut off gas if the pilot flame is extinguished. Relighting is a safe, easy procedure. Thermostat settings to 160°F. A
•Temperature and pressure relief valve – AGA/ASME rated and factory installed.
•Full port, full flow brass drain valve
Installation Flexibility
Certifications and Ratings:
•Efficiency – these models have been tested according to DOE test procedures, and meet or exceed the thermal efficiency and standby loss requirements of current ASHRAE standards (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states including California Energy Commission (CEC).
•Safety and construction – these products are design certified by CSA Laboratories: a) For operation at 160°F. b) To meet all safety and construction requirements of ANSI Z21.10.1/ANSI Z21.10.3.
c) As an automatic storage water heater. d) For operation of combustible floors and alcove installations. e) For combination water heating and space heating applications. All models are North Carolina and Massachusetts Code compliant. Certified for a 150 PSI Maximum Working Pressure.
Continued on reverse.
