VentMaster Power Direct Vent Gas Commercial Water Heaters

Available in 100 Gallon Tank-Type Models

150,000 BTU/Hr. Thru 250,000 BTU/Hr.

VentMaster power direct vent gas commercial water heaters by Rheem-Ruud are designed to fill the need wherever large quantities of hot water are required. Typical installations include restaurants, hotels, laundromats and multiple family housing.

Construction Features:

(On Selected

Models)

•Non-condensing design – helps prevent corrosion – no condensate pump or drain needed.

•Integral automatic blower – with 110/120 volt electrical system.

•Patented multi-flue tank design – proprietary steel formulation, patented multi-flue design, and two coats of high temperature porcelain enamel to maximize corrosion resistance result in a superior heat exchanger design.

•Spark-To-Pilot ignition system – standard on both models. Provides reliable and energy sav- ing ignition sequencing by igniting the pilot only when the thermostat calls for heat.

•Base rail design –

for better handling when moving and positioning the unit.

•System Sentinel™ LED diagnostic system –

our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence.

•Full port, full flow brass drain valve

•Temperature and pressure relief valve – AGA/ASME rated and factory installed.

•Hand-hole cleanout –

for removal of lime/sediment deposits.

•Gas control system –

fully adjustable thermostat from 100° F to 180° F, 24 volt combination gas valve includes main gas pressure regulation, on-off manual valve, 120/24 volt transformer, and high limit temperature cut-out.

Negative Air Pressure

Issues Are Eliminated

By Drawing

Combustion Air

From Outside

The Building

Installs With

3" Or 4"

Schedule 40

PVC Pipe

No Masonry

Or Metal Vent

Chimney

Required

120V/1.5 Amps

Required

Certifications and Ratings:

•Efficiency – these models have been tested according to ANSI test procedures, and meet or exceed thermal efficiency and standby loss requirements of current ASHRAE standards. (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states including California Energy Commission (CEC).

•Safety and construction – these products are design certified by CSA:

a)For operation up to 180°F. b) To meet all safety and construction requirements of ANSI Z21.10.3. c) As an automatic storage or instanta- neous water heater. d) As an automatic circulating tank water heater.

e)For operation on combustible floors and in alcove installations. All models are North Carolina Code compliant.

CERTIFIED FOR A 150 PSI MAXIMUM WORKING PRESSURE (160 PSI FOR ASME MODELS).

•Optional construction – ASME construction is available on designated models.

Continued on reverse.

Page 1 Page 2
Page 1
Image 1
Rheem Direct Vent Gas Commercial Water Heater manual Available in 100 Gallon Tank-Type Models, Construction Features
Page 1 Page 2

Direct Vent Gas Commercial Water Heater specifications

The Rheem Direct Vent Gas Commercial Water Heater represents a significant advancement in water heating technology, designed specifically for the demanding needs of commercial applications. Engineered for efficiency, reliability, and performance, this model is a preferred choice for businesses that require a constant supply of hot water.

One of the standout features of the Rheem Direct Vent Gas Commercial Water Heater is its direct venting system. This technology allows for safe and efficient exhaust of combustion gases directly outdoors, minimizing indoor air contamination and enhancing safety in commercial settings. This is particularly beneficial in enclosed spaces where ventilation may otherwise be a concern.

The water heater is available in a variety of capacities, ensuring that it can meet the hot water demands of any commercial establishment, from restaurants and hotels to manufacturing facilities. With an impressive first-hour delivery rate, the Rheem model is designed to provide a continuous supply of hot water even during peak usage times. This is crucial for businesses where downtime can translate into lost revenue.

In terms of energy efficiency, the Rheem Direct Vent Gas Commercial Water Heater utilizes advanced insulation technologies which minimize heat loss. This not only helps in reducing energy bills but also contributes to a lower environmental impact. By consuming less energy, businesses can achieve significant savings over time, making this water heater a cost-effective solution for large-scale operations.

Another notable characteristic is the user-friendly digital controls, which allow for precise temperature settings and easy monitoring of water heating performance. This feature ensures that businesses can maintain the desired hot water temperature, thus improving operational efficiency and enhancing customer satisfaction.

Durability is a key aspect of the Rheem design. Constructed with high-quality materials, these water heaters are built to withstand the rigors of constant use in commercial environments. Additionally, the units are designed for easy maintenance, with accessible components that allow for quick service and reduced downtime.

In summary, the Rheem Direct Vent Gas Commercial Water Heater is an innovative, efficient, and dependable choice for businesses seeking reliable hot water solutions. With its direct venting technology, superior energy efficiency, user-friendly controls, and robust construction, it stands out as a leader in commercial water heating systems.
Top Page Image Contents