To the Installer: |
| To the Consumer: |
Please attach these instructions |
| Please read these and all component |
next to the indirect water heater. |
| instructions and keep for future reference. |
WARNING
Improper installation, adjustment, alteration,
service or maintenance can cause serious injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer or service agency.
CAUTION
The recommended temperature for normal residential use is 120°F. The dial on the aquastat does not always reflect the
WARNING
Hotter water increases the risk of scald injury . Before adjusting the water temperature setting, read this instruction manual. Temperatures at which injury occurs vary with the person’s age and the length of exposure.
The slower reaction time of children, elderly, and physically or mentally challenged persons increases the scalding hazard to them. It is recommended that lower water temperatures be used where these exposure hazards exist. Such households may require a temperature setting less than 120°F to prevent accidental contact with hot water.
To lower water temperature use
WARNING
Water heater blankets are not recommended and will void the warranty.
THIS MANUAL HAS BEEN PREPARED
TO ACQUAINT YOU WITH THE INSTALLATION,
OPERATION, AND MAINTENANCE OF
YOUR INDIRECT WATER HEATER AND TO PROVIDE
IMPORTANT SAFETY INFORMATION.
Indirect Water Heater
Instruction Manual
Warranty and Parts List are included.
INSTALLER RESPONSIBILITIES
Please read all instructions thoroughly before installing or placing the indirect water heater into service. This unit must be installed by
licensed or authorized installers, or technical personnel that service water heating equipment. The indirect water heater must be installed in accordance with all local codes and ordinances.
These instructions are a guide for the correct installation of the indirect water heater. The manufacturer will not be liable for damages caused by failure to comply with the installation and operating instructions outlined on the following pages.
CAUTION
The recommended water temperature setting for normal residential use is 120°F/49°C.
HANDLING
Before uncrating, check for shipping damage. Report any damage to your carrier. Note damage on bill of lading or delivery receipt and file a claim.
FAILURE TO FOLLOW THESE INSTRUCTIONS OR ALL APPLICABLE BUILDING CODES AND REGULATIONS VOIDS THE WARRANTY
ON THIS INDIRECT WATER HEATER.
Read all instructions thoroughly before attempting installation or operation of your indirect water heater. Keep these instructions for future reference.
Local plumbing and electrical codes must be
followed in the installation of this indirect water heater. In the absence of a local code use the UNIFORM PLUMBING CODE and the NFPA Code. Local codes may supersede instructions in this installation manual.
These instructions are a guide for the correct
installation of the indirect water heater. The manufacturer will not be liable for damages caused by failure to comply with the installation and operating instructions outlined on the following pages.
#23960 | RevP1ge5/081 |