![](/images/new-backgrounds/1059035/5903563x1.webp)
22)Temperature and Pressure Relief Valve: Universally required by the plumbing code on water heaters. Will automatically release and dump water at either 150 PSI of pressure or 210° F in temperature. (Provided)
23)Cold Water Supply Line Isolation Ball Valve:
When open allows potable water to fill the solar storage tank or
24)Three Way Ball Valve: Used in conjunction with component No. 26 to establish the proper mode of system operation. (Not Provided)
25)Isolation Ball Valve: Used in conjunction with component No. 24 to completely isolate the solar storage tank for repair or replacement as necessary. (Not Provided)
26)Three Way Ball Valve: Used in conjunction with component No. 24 to establish the proper mode of system operation. (Not Provided)
27)Cold Water Dip Tube: See No.16 above. 28) Anode Rod: See No. 18 above. 29) Heating Elements and Thermostats: See No. 19 above. In a two tank system the
30)Temperature and Pressure Relief Valve: See No. 22 above. (Provided)
31)Optional Isolation Ball Valve. Use with component No. 26 to completely isolate the
32)Mixing Valve: Automatically blends hot water from the solar storage tank with incoming city cold water to an acceptable set point. A mixing valve must be installed on every Rheem solar water heating system. (Provided)
33)Optional Time Switch: Allows you to automatically or manually turn the auxiliary heating element in the solar storage tank on and off. A
time switch is a highly recommended option. (Not Provided)
34) Thermal Well (Not Pictured)
11)Rheem SYSTEM MODEL NUMBERS: RS80-48BP
WWW.RHEEM.COM
PLEASE VISIT OUR WEB SITE FOR NEW PRODUCT UPDATES, ANSWERS TO FREQUENTLY ASKED QUESTIONS (FAQ) AND USEFUL INFORMATION ABOUT SOLAR WATER HEATING SYSTEMS.
32