6.Emergency eject hole

This drive has a function that allows the disc to be ejected manually for an emergency case such as failure of the drive or a power outage.

This feature is a last measure to be used only in an emergency. Using it excessively will cause malfunction.

Rear panel

1.Digital Audio (SPDIF) Output Connector

Provides output to a sound card (Digital signal).

*No digital audio cable is included with the MP5125A.

2.Analog Audio Output Connector

Provides output to a sound card (Analog signal).

3.Jumper Connector

This jumper determines whether the drive is configured as a master or slave. Changing the master-slave configuration takes effect after power-on reset.

4.IDE Interface Connector

Connect to the IDE (Integrated Device Electronics) interface using a 40-pin flat IDE cable.

Caution

Do not connect or disconnect the cable when the power is on, as this could cause a short circuit and damage the system. Always turn the power OFF when connecting or disconnecting the cable.

5.Power Connector

Connects to the power supply (5 and 12V DC) of the host computer.

Be careful to connect with the proper way.

Connecting the wrong way may damage the system (and is not guaranteed).