Specific knowledge of hardware and software is necessary to install the drive. We cannot guarantee against direct or indirect damage resulting from improper connections. Ask your supplier for details of the installation procedure.

Before Installation

Before installing the drive, please note the following points.

●You will need the following:

❍A Phillips head screw driver of a suitable size to fit the securing screws for the drive unit.

❍The manual for the computer, to know the location of the IDE connector.

●Turn off all peripheral devices of the computer, and the computer itself, and disconnect their power cords from the wall sockets.

●Discharge any static electricity by touching the computer covers etc.

●Before installing the drive, be sure to read the following cautions and information on preparation. Keep a serial number label at the location specified by "READ ME FIRST".

Installing the Drive

1.Jumper Set Up

2.Removing the Computer Cover

3.Mounting the Drive

4.Connecting the Power Connector

5.PC Connections

6.Sound Card Connection

7.Replacing the Computer Cover

8.Device Drivers