8.Device Drivers

When using Windows 98/95 or Window NT Workstation Ver. 4.0, the installation of any special device drivers are not required.

In order to ensure normal drive operation or if the drive is not recognized by your computer, please check the following:

In order to ensure normal drive operation

If the drive is not recognized by your computer

In order to ensure normal drive operation

please check the following

For Windows 98/95 Users

●The drive is displayed in [control panels] - [system] - [device manager] - [CD-ROM]

●32-bit is displayed in [control panels] - [system] - [performance]

For Windows NT Workstation Ver.4.0 Users

●The drive is displayed on the IDE controller in [control panels] - [SCSI adapter] -[devices]

If the drive is not recognized by your computer

For Windows 98/95 Users

●If a [!] indicator is displayed on the IDE controller in [control panels] - [system] -[devices manager]-[harddisk controler], you will need to contact your PC manufacturer or the motherboard manufac-turer and get the appropriate IDE controller driver.

For Windows NT Workstation Ver.4.0 Users

●If a [!] indicator is displayed on the IDE controller in [control panels] - [SCSI adapter] -[devices] , you will need to contact your PC manufacturer or the motherboard manufacturer and get the appropriate E-IDE controller driver.

Back

1.Jumper Set Up 2. Removing the Computer Cover

3.Mounting the Drive 4. Connecting the Power Connector

5.PC Connections 6. Sound Card Connection

7.Replacing the Computer Cover 8. Device Drivers