Installing the Printer Driver

L In the [Printer URL] box, enter “http://printer's address/printer” as the printer's address.

If the server authentication is issued, to enable SSL (a protocol for encrypted

 

communication), enter “https://printer's address/printer” (Internet Explor-

1

er 5.01, or a higher version must be installed).

(example IP address: 192.168.15.16)

http://192.168.15.16/printer

https://192.168.15.16/printer

You can enter “http://printer's address/ipp” as the printer's address.

M Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the one of any existing port.

If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name.

N Click [Detailed Settings] to make necessary settings.

For information about the settings, see SmartDeviceMonitor for Client Help.

O P Q

Click [OK].

Check that the port of the selected printer is displayed in [Port:].

Set a user code, if necessary.

Up to 8 numeric characters can be entered. No alphabetic characters or symbols can be entered.

R S

Select the [Default Printer] check box to configure the printer as default.

Click [Continue].

Installation starts.

T After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].

Restart the computer to complete installation.

Note

❒To stop installation of the selected software, click [Cancel] before installa- tion is complete.

❒Auto Run may not work with certain operating system settings. In that case, launch “Setup.exe” on the CD-ROM root directory.

❒Setting a user code allows a SmartDeviceMonitor for Admin user to dis- play and check the number of sheets each user prints. For details, see SmartDeviceMonitor for Admin Help.

29