Using as a Windows Network Printer

 

 

I Double-click the printer name to display the printer settings.

 

 

The details shown in [Comment:], [Driver:], and [Port:] vary depending on the

 

 

operating system, printer model, and port.

 

 

J Click [Port:], and then click [Add].

 

 

1

K Click [Network Printer], and then click [OK].

L Double-click the computer name you want to use as a print server in the [Browse for Printer] window.

M Select the printer you want to use, and then click [OK].

N Check that the port of the selected printer is displayed in [Port:].

O Configure the user code as necessary.

For an RPCS printer driver, a user code can be set after the printer driver in- stallation. For information about user code, see the printer driver Help.

P Q

Select the [Default Printer] check box to configure the printer as default.

Click [Continue].

The printer driver installation starts.

R After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].

Restart the computer to complete installation.

Note

❒To stop installation of the selected software, click [Cancel] before installa- tion is complete.

❒Auto Run may not work with certain operating system settings. In that case, launch “Setup.exe” on the CD-ROM root directory.

Reference

A message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add Printer]. See “When a Message Appears during Installation of the Printer Driver”, Trouble Shooting.

35