Preparing the Machine
❖When connected with the network
•The machine must support bidirectional communication.
•SmartDeviceMonitor for Client included on the
1• Under Windows 2000, [Enable bidirectional support] must be selected, and [Enable printer pooling] must not be selected on the [Ports] tab with the RPCS printer driver.
•In addition to the above, one of the following conditions must also be met:
•The SmartDeviceMonitor for Client port and the TCP/IP protocol must be used.
•The standard TCP/IP port must be used without changing the default port name (for Windows 2000 / XP and Windows Server 2003).
•Microsoft TCP/IP print IP address must be specified for use (for Win- dows NT 4.0).
•IPP port name must include the IP address when using the IPP protocol.
❖When connected with IEEE 1394
•The computer must support bidirectional communication.
•The machine must be connected to the IEEE 1394 connector of a computer using the IEEE 1394 interface cable.
•[Activate] must be selected in the SCSI print of IEEE 1394 and [Activate] must be selected in the
•Under Windows 2000 / XP or Windows Server 2003, [Enable bidirectional support] must be selected, and [Enable printer pooling] must not be selected on the [Ports] tab with RPCS printer driver.
❖When connected with USB
The machine must be connected to the computer's USB port using the USB in- terface cable.
The computer must support bidirectional communication.
Note
❒Install SmartDeviceMonitor for Client from the supplied
52