Ricoh Priport, JP1210/1250 manual SilverV-gb.book Page 6 Monday, May 15, 2000 332 PM

SilverV-gb.book Page 6 Monday, May 15, 2000 3:32 PM

Operation

E Press the {Proof} key and check the image density and the image position of the proof print.

1

TSLS013E

Note

❒If the image position is not cor- rect, adjust it using the {Image Position} keys or the fine adjust- ment dial. See ⇒ P.9 “Adjusting the Print Image Position”.

❒If the image density is slightly

dark or light, adjust the image density using the {W} or {V} key. See ⇒ P.11 “Adjusting the Print Image Density”.

F Enter the number of prints re- quired with the number keys.

G Press the {Print} key.

TSLS014E

Note

❒After printing is completed, the same number of prints is auto- matically set for the next job.

❒To stop the machine during the multi-print run, press the {Clear/ Stop} key.

❒To return the machine to the in-

itial condition after printing, press the {Clear Modes/Energy Saver} key.

TSLS011E

Note

❒Up to 9999 prints can be entered at one time.

❒To change the number entered, press the {Clear/Stop} key and enter the new number.

6