Ricoh Priport, JP1210/1250 manual Reference, Set the first original face down

SilverV-gb.book Page 34 Monday, May 15, 2000 3:32 PM

	Operation
			Minimum	Maximum
		A4 drum	91 mm,	198 mm,
		model	3.6"	7.7"
		B4 drum	91 mm,	243 mm,
1
		model	3.6"	9.5"

❒Master length = actual original length × Enlargement/Reduction ratio

❒Any image closer than 5mm, 0.2" to the leading edge of the first orig- inal will not be printed. Also, any image closer than 4mm, 0.16" to the leading edge of the second original will not be printed. When the image is too close to the leading edge, use copies of the originals with the image shifted at least 5mm, 0.2" for the first original (4mm, 0.16" for the second origi- nal) from the leading edge.

❒You can select different image set- tings for the first and second origi- nal.

❒Make sure that the paper feed side plates touch the paper lightly when using the Combine Copies function. If they do not, the two original images will not appear at the proper position on the prints.

Reference

For how to use the optional docu- ment feeder with this function, see

⇒P.30 “Memory Mode—Group Printing from Different Originals”.

34

A Press the {Combine} key once or more to select the type of combine (see below).

		B4 drum	A4 drum
	1	A4LL →	A4LL →
presses		A4	A4
	2	A4LL →	71-141%
		B4	(Manual Set-
Key			tings)
	3	B4LL →	No Combine
of
		B4
Number
	4	71-141%	——
		(Manual Set-
		tings)
	5	No Combine	——

B Set the first original face down.

TSLY01AE

Note

❒The first original will be printed

on the leading part of the print.