Ricoh RDC-6000 operation manual Status Explanation and Remedy Reference, No Image

Note • All items of information are shown for illustration purposes. During actual camera operation, only the relevant items are displayed.

■Warning Message

If any of the warning messages listed below appear on the camera’s LCD monitor, read the corresponding explanation and take the corrective action suggested.

Warning		Status	Explanation and Remedy	Reference
Message				Page
		Flashing	Indication low batteries. Have	P.27
			replacement batteries ready
		Lit	System in processing	–
CARD FULL		Flashing	The SmartMedia Memory Card has	P.29
			run out of memory
NO CARD		Flashing	The SmartMedia memory card is out	P.30
			of position. Mount a SmartMedia
			memory card
NO IMAGE		Lit	There are no files to play.	P.74
			Mount a SmartMedia memory card
			with files recorded on it.
WRITE		Flashing	A write-protected SmartMedia memory
PROTECTED			card is found. Remove the write	P.29
			protection label from the card to gain
			access to it
UNMATCHED		Flashing	You attempted to play an unplayable	P.74
	FILE		file.
	FILE	Flashing	No more file numbers can be added.	P.30
NUMBER			Insert a new SmartMedia memory
OVER			card to continue recording.
SET DATE/		Flashing	The date has not been set. Set the	P.33
	TIME		date before starting operations with
			the camera.

13