Ricoh RDC-7 manual Adjusting the Strength of the Flash, Flash Strength

■Adjusting the Strength of the Flash

When shooting with the flash activated (, lit, blinking), you can adjust the strength of the flash.

q Set the mode dial to [ ] or [ ] and press the MENU button.

w Press the or button to select

[FLASH STRENGTH].

e Press the or button to select the desired strength (NORMAL, STRG or SOFT) and press the ENTER button.

r Press the MENU button.

If you select STRONG, + is displayed on the LCD monitor, and if you select SOFT, – is displayed. There is no display when you select NORMAL.

SHOOTING MODE		1/3
IMAGE WITH SOUND		OFF
FOCUS		AF
FLASH STRENGTH		NORMAL
REDEYE REDUCTION		OFF
ISO SENSITIVITY		AUTO
SELECT:	CHANGE:
BACK:MENU		SEL.:ENTER

2

Shooting

t Press the shutter release button to	28
shoot the image.

Note • Enable the keep settings mode to save the flash brightness setting. See “Keep Settings” → (p.99).

55