Ricoh Type 480 Press, A Select the destination folder, Selecting a destination folder from the list, B To select more destination fold- ers, repeat step A

Sending Scan Files by Scan to Folder

•Enter the path for the folder of a client computer on the same network directly.

•Specify the folder in the FTP server.

•Select it from the client comput- ers on the same network.

Note

❒Destinations in the destination list and registration numbers must be registered in advance in [System Settings]. For details, see “System Settings”, General Settings Guide.

❒Depending on the security set- tings, certain destinations may not be displayed.

Selecting a destination folder from the listA Select the destination folder.

The selected folder is highlighted and also is displayed in the destination field at the top of the screen.

Note

❒If the target destination does not appear, take one of the following steps:

•Display the destination by selecting its initial letter from the title.

•Display the destination by pressing [U] or [T].

❒If a protection code has been set for the shared folder, a screen for entering the pro- tection code appears.

B To select more destination fold- ers, repeat step A.

Note

❒To deselect a destination, press the destination once more, or

press [UPrev.] or [TNext] to display the destination in the 3 destination field, and then press the {Clear/Stop} key.

Using a registration number to select a destination folder

APress [Registration No.].

BEnter the five digit registration number that has been assigned to a destination folder using the number keys.

If the entered number is less than five digits, press the {#} key after the last number.

Example: To enter 00004

Press the {4} key, and then press the {#} key.

Note

❒If a protection code has been set for the shared folder, a screen for entering the pro- tection code appears.

C To select more destination fold- ers, repeat step B.

35