Lubrication

This compressor is shipped with oil.

Dipstick

Use single viscosity, ISO 100 (SAE 30), non-detergent compressor oil; or Mobil 1® 5W30 or 10W30 synthetic oil may also be used. See illustration for proper oil fill.

Refer to engine manual for proper oil level and type.

Add Oil

Max

Fill

Low Line

Full

Add Oil

Start-Up

To ensure proper operation, unit must be on a level surface.

1.Fill engine with oil and gasoline per instructions furnished with engine.

2.Remove the compressor dipstick breather or check oil sight glass to ver- ify proper oil level.

3.Turn manual unloader lever up to a horizontal position to allow the com- pressor pump to run without com- pressing air.

Manual Unloader Lever in the Unloaded Position

11