Maintenance
Release all pressure from the system before attempting to install, service, relocate or perform any maintenance.
In order to maintain efficient operation of the compressor system, check the air filter weekly (per maintenance schedule), oil level and gasoline level before each use. The ASME safety valve should also be checked weekly. Pull ring on safety valve and allow the ring to snap back to normal position. This valve automatically releases air if the tank pressure exceeds the preset maximum. If air leaks after the ring has been released, or the valve is stuck and cannot be actuated by the ring, the ASME safety valve MUST be replaced.
With engine OFF, clean debris from engine, flywheel, tank, air lines and pump cooling fins.
Do not attempt to tamper with the ASME safety valve!
Maintenance Schedule
| Operation | Daily Weekly Monthly 3 Months |
|
| Check Oil Level | ● |
|
| Drain Tank | ● |
|
| Check Air Filter | ● |
|
| Check Safety Valve | ● |
|
| Blow Dirt From Unit | ● |
|
| Check Belt Tightness | ● |
|
| Change Oil | ● |
|
|
|
|
|
13