RIDGID MS 1065LZ manual Table of Contents, Introduction

TABLE OF CONTENTS
￿ Introduction	2
￿ Symbols	3
￿ Rules for Safe Operation	4-6
￿ Glossary of Terms	6
￿ Product Specifications and Electrical	7
￿ Unpacking and Tools Needed	8
￿ Loose Parts	9
￿ Features	10-12
￿ Assembly	13-15
￿ Adjustments	15-18
￿ Operation	18-25
￿ Laser Guide	26-27
￿ Maintenance	28
￿ Warranty	29
￿ Parts Ordering/Service	30

INTRODUCTION

Your saw has many features for making the use of this product more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.

WARNING:

Do not attempt to use this product until you thoroughly read and completely understand the operatorÕs manual. Pay close attention to the safety rules, including Dangers, Warnings, and Cautions. If you use your product properly and only as intended, you will enjoy years of safe, reliable service.

IMPORTANT

Servicing of a tool with double insulation requires extreme care and knowledge of the system and should be performed only by a qualified service technician. For service we suggest you return the tool to your nearest AUTHORIZED SERVICE CENTER for repair. When servicing use only identical replacement parts.

WARNING:

Do not attempt to use this product until you read thoroughly and understand completely the operatorÕs manual. Pay close attention to the safety rules, including Dangers, Warnings, and Cautions. If you use your product properly and only as intended, you will enjoy years of safe, reliable service.

Look for this symbol to point out important safety precautions. It means attention!!! Your safety is involved.

The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1.

2