RIDGID R150FSA CLEARING A JAMMED FASTENER

OPERATION

CLEARING A JAMMED FASTENER

See Figure 10.

WARNING:

Disconnect the tool from the air supply before

clearing a jammed fastener. Failure to do so could

result in serious personal injury.

If a nail or fastener becomes jammed in the tool, disconnect

the air hose and keep the tool pointed away from you while

clearing the jam.

n �Open the magazine and remove the fasteners from the

tool.

n Insert a flat blade screwdriver into the driving mechanism

and push the driver mechanism back, freeing the fastener

jam.

n Remove the bent fastener.

n Reconnect the tool to the air supply.

n Reinsert fasteners and close the magazine.

Fig. 10

Contents

Main OPERATORS MANUAL FINISH STAPLER TABLE OF CONTENTS INTRODUCTION GENERAL SAFETY RULES DANGER SAVE THESE INSTRUCTIONS WORK AREA PERSONAL SAFETY TOOL USE AND CARE SPECIFIC SAFETY RULES OPERATION SPECIFIC SAFETY RULES AIR SUPPLY AND CONNECTIONS LOADING TOOL SAVE THESE INSTRUCTIONS SYMBOLS SERVICE SAVE THESE INSTRUCTIONS WARNING: SYMBOL NAME DESIGNATION/EXPLANATION GLOSSARY OF TERMS FEATURES PRODUCT SPECIFICATIONS FEATURES UNPACKING PACKING LIST ASSEMBLY APPLICATIONS NO-MAR PAD ADJUSTING THE EXHAUST CONNECTING THE TOOL TO AN AIR SUPPLY LOADING THE TOOL WITH STAPLES USING THE SELECTABLE TRIGGER SINGLE SEQUENTIAL ACTUATION MODE CONTACT ACTUATION MODE DRY-FIRE LOCKOUT SETTING THE AIR PRESSURE DRIVE DEPTH ADJUSTMENT REMOVING STAPLES FROM THE TOOL CLEARING A JAMMED FASTENER MAINTENANCE LUBRICATION COLD WEATHER OPERATION CAUTION: WARNING: TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION WARRANTY RIDGID PNEUMATIC TOOL 3 YEAR LIMITED SERVICE WARRANTY 90-DAY SATISFACTION GUARANTEE POLICY WHAT IS COVERED UNDER THE 3 YEAR LIMITED SERVICE WARRANTY HOW TO OBTAIN SERVICE OPERATORS MANUAL FINISH STAPLER R150FSA