FEATURES
KNOW YOUR LAMINATE TRIMMER
See Figure 1.
Before attempting to use this product, familiarize yourself with all operating features and safety rules.
TOGGLE SWITCH
The toggle switch is located on top of the motor housing. The toggle switch features a soft start to prolong motor life and gives the operator more control when starting the laminate trimmer.
ELECTRONIC FEEDBACK
An electronic speed control module senses the load applied to the motor, and increases or decreases motor voltage to compensate for and maintain desired RPM.
VARIABLE SPEED DIAL
The variable speed dial, located on the top of the motor housing, enables you to adjust the speed of the bit from 20,000/min to 30,000/min.
LIGHTED PLUG
The lighted plug with tool icon helps to easily identify live tools.
MOTOR
The laminate trimmer has a powerful 6 amp permanent magnet motor with sufficient power to handle many trim- ming jobs.
DEPTH OF CUT SCALE
The laminate trimmer has an adjustable depth of cut scale located on the side of the motor housing.
EDGE GUIDE
The edge guide will keep the bit a certain distance from the edge of a straight workpiece.
BEARING GUIDE ASSEMBLY
The bearing guide assembly can be used to guide the bit along the edge of a workpiece that is curved. The bearing guide assembly features a micro adjust screw.
ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
WARNING:
If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
Laminate Trimmer
Wrenches (2)
Edge Guide
Bearing Guide Assembly
Guide Bars (2)
Bearing Flush Trim Bit
Carrying Case
Operator’s Manual
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.
9
