GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way.

Double insulation eliminates the need for the three- wire grounded power cord and grounded power supply system.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase

the risk of electric shock.

When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

Do not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be drawn into air vents.

Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the tool in unexpected situations.

TOOL USE AND CARE

Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

Store idle tools out of the reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by

poorly maintained tools.

Page 2 Page 4
Page 3
Image 3
RIDGID R3020 manual General Safety Rules, Work Area, Electrical Safety, Personal Safety, Tool USE and Care
Page 2 Page 4

R3020 specifications

The RIDGID R3020 is a versatile and powerful addition to any tradesperson's toolbox, specifically designed for cutting and shaping various materials with precision and ease. This advanced saw combines robustness with state-of-the-art technology to deliver outstanding performance in both professional and DIY applications.

One of the standout features of the RIDGID R3020 is its innovative design that facilitates ease of use. With a compact, lightweight body, the R3020 is easily maneuverable, allowing users to operate it in tight spaces without sacrificing power. The integrated handle ensures a secure grip, enhancing control during operation.

Powering the R3020 is a reliable motor that boasts impressive horsepower, providing the necessary torque to tackle tough materials like wood, plastic, and metal. This powerful motor enables users to make clean and accurate cuts, significantly reducing the time spent on projects. Additionally, the saw's variable speed control allows users to adjust the cutting speed to match the specific material they are working with, ensuring optimal performance and versatility.

Another significant technology incorporated into the RIDGID R3020 is the advanced blade system. The saw supports various blade sizes and types, which can be easily swapped out, allowing users to customize the tool for specific tasks. This adaptability makes the R3020 ideal for users who require a saw that can handle different materials and applications without needing multiple tools.

Safety features are paramount in the design of the RIDGID R3020. It includes a blade guard that automatically retracts when the saw is in operation, providing optimal protection for users while maintaining visibility of the cutting line. The saw also features a built-in LED light that illuminates the workspace, ensuring users can see their cuts clearly even in low-light conditions.

Durability is another key aspect of the R3020. Constructed with quality materials, the saw is designed to withstand the rigors of heavy use while maintaining its performance over time. Additionally, RIDGID offers a comprehensive warranty on the R3020, underscoring the brand's commitment to customer satisfaction and product reliability.

In summary, the RIDGID R3020 is a leading-edge saw that combines power, versatility, and safety features to meet the demands of various cutting applications. Its user-friendly design and advanced technology make it an excellent choice for both professional tradespeople and DIY enthusiasts, ensuring that it remains a valuable tool in any workshop.
Top Page Image Contents