RIDGID R3202 manual Symbols, Symbol Name DESIGNATION/EXPLANATION

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL	NAME	DESIGNATION/EXPLANATION
V	Volts	Voltage
A	Amperes	Current
Hz	Hertz	Frequency (cycles per second)
W	Watt	Power
min	Minutes	Time
	Alternating Current	Type of current
	Direct Current	Type or a characteristic of current
no	No Load Speed	Rotational speed, at no load
	Class II Tool	Double-insulated construction
.../min	Per Minute	Revolutions, strokes, surface speed, orbits etc., per minute
	Wet Conditions Alert	Do not expose to rain or use in damp locations.
	Read The Operator’s Manual	To reduce the risk of injury, user must read and understand
		operator’s manual before using this product.
	Eye Protection	Always wear safety goggles, safety glasses with side shields, or
		a full face shield when operating this product.
	Safety Alert	Precautions that involve your safety.
	No Hands Symbol	Failure to keep your hands away from the blade will result in seri-
		ous personal injury.
	No Hands Symbol	Failure to keep your hands away from the blade will result in
		serious personal injury.
	No Hands Symbol	Failure to keep your hands away from the blade will result in
		serious personal injury.
	No Hands Symbol	Failure to keep your hands away from the blade will result in
		serious personal injury.
	Hot Surface	To reduce the risk of injury or damage, avoid contact with any
		hot surface.