Customer Service Information | RIDGID R5013 specs

987000-060

01-23-07 (REV:00)

OPERATOR’S MANUAL

1/2 in. HAMMER DRILL

DOUBLE INSULATED

R5013

Customer Service Information:

For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.

The model number of this tool is found on a plate attached to the motor housing. Please record the serial number in the space provided below. When ordering repair parts, always give the following information:

Model No.	R5013
Serial No.

Page 18

Image 18

RIDGID manual Customer Service Information, Model No R5013 Serial No

Contents

OPERATOR’S Manual Double Insulated Table of Contents Introduction Personal Safety General Safety RulesElectrical Safety Power Tool USE and Care Specific Safety Rules Service Symbols Name DESIGNATION/EXPLANATION Symbol Signal Meaning Double Insulation Cord Length Wire Size A.W.GElectrical Electrical Connection Features Product SpecificationsDRILLING/HAMMER Depthmode Selector Stop ROD Chuck Assembly Applications Switch TriggerOperation LOCK-ON Button Right Wrong To Install BitsTo Remove Bits See Figures 4 Using the Auxiliary Handle Assembly See Figures 6 Drilling Mode Mode Selector LOCK-ON Button Selecting Hammer Mode or Drilling ModeHammer Mode To lock-on Drilling Wood Drilling Metal Drilling MaintenanceGeneral Maintenance Masonry Drilling See Figures 11 Chuck RemovalTo Retighten a Loose Chuck To tighten What is Covered Under the 3 Year Limited Service Warranty WarrantyDAY Satisfaction Guarantee Policy HOW to Obtain Service What is not Covered Customer Service Information Model No R5013 Serial No

OPERATOR’S MANUAL

1/2 in. HAMMER DRILL

DOUBLE INSULATED

R5013

Customer Service Information:

Model No.

R5013

Serial No.