![](/images/new-backgrounds/1146359/14635927x1.webp)
MAINTENANCE
TO RETIGHTEN A LOOSE CHUCK
The chuck may become loose on the spindle and develop a wobble. Also, the chuck screw may become loose, caus- ing the chuck jaws to bind and prevent them from closing. To tighten:
Unplug the drill.
Open the chuck jaws.
Insert the hex key into the chuck and tighten the chuck jaws securely. Tap the hex key sharply with a mallet in a clockwise direction. This will tighten the chuck on the spindle.
Open the chuck jaws and remove the hex key.
Tighten the chuck screw.
NOTE: The chuck screw has left hand threads.
ACCESSORIES
Look for these accessories where you purchased this product: |
|
� High Speed Bits (For wood or metal) | 1/2 in. |
� Wood Boring Bits | |
� Hole Saws |
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.
14