
OPERATION
TO INSTALL BATTERY PACK
See Figure 4.
nAlign the raised rib on the battery with the groove inside flashlight base.
nSlide together until latches click.
CAUTION:
When placing battery pack in the worklight, be sure raised rib on battery pack aligns with groove inside worklight and latches snap into place properly. Improper installation of the battery pack can cause damage to internal components.
RAISED
RIBS
LATCHES
BATTERY
Fig. 4
CAUTION:
Battery tools are always in operating condition. Use caution when carrying to prevent depressing the switch trigger when light is not needed.
TO REMOVE BATTERY PACK
nLocate latches on side of battery pack and depress to release battery pack from worklight.
nRemove battery pack from worklight.
TO TURN WORKLIGHT ON/OFF
See Figure 5.
To turn worklight ON or OFF, depress switch trigger located beneath handle.
TO CHANGE BEAM DIRECTION
See Figure 5.
Rotate worklight head up to 180˚ to change direction of light beam.
TO ADJUST WORKLIGHT BEAM
See Figure 5.
nWhile holding worklight with beam pointed away from you, secure worklight head to prevent rotation.
nWith your other hand, twist beam adjustment ring clock- wise for a
SWITCH
TRIGGER
180° ROTATING HEAD
ADJUSTABLE BEAM
SPOT BEAM | Fig. 5 |
|
11