Install Dozer Blade
1.Fully lower the attachment lift.
2.See Figure 15. Attach the dozer to the tractor by resting the dozer pins (A) on the front attachment hooks (C).
3.See Figure 15. Install two clevis pins (B) on both sides and secure with safety clips.
4.See Figure 16. Attach the dozer lift arm (B) to the hitch lift arm (E) using a clevis pin and safety clip.
NOTE: At this point during initial installation tighten the capscrews (C, Figure 10) securing the rear hitch mount- ing brackets. This is only necessary when installing the attachment for the first time.
Initial Assembly & Installation
A |
B |
C |
Figure 15. Attach Dozer
A. Dozer PinsC. Attachment Hooks B. 5/8 x 1-5/8” Flat Head Clevis Pin
A | C |
|
|
|
|
|
| H |
|
G | E | D | F |
|
|
| |||
|
|
|
| |
|
|
| I | C |
J |
|
|
| |
B |
|
|
| |
|
|
|
|
Figure 16. Lift Rod
A. 1/2 x 1-1/2” Round Head F. Lift Rod
Clevis Pin | G. Front Hitch Bracket | |
B. Dozer Lift Arm | H. Lift Extension | |
C. Safety Clip | I. | 5/8 x |
D. Ladder Hitch |
| Clevis Pin |
E. Hitch Lift Arm | J. 1/2 x 2” Flat Head | |
|
| Clevis Pin |
13
