Snapper 2137 manual Angling Control Lever, Attachment Lift, Two-Speed Control

		Features & Controls
		Please Take a moment and
	A	familiarize yourself with the
		name, location, and function
		of these controls so that you
		will better understand the safety
		and operating instructions pro-
		vided in this manual.
	C
		Figure 1. Dozer Blade Controls
B		A. Angling Control Lever
		B. Attachment Lift Pedals
		C. Two-Speed Control

CONTROL FUNCTIONS

The information below briefly describes the function of individual controls. Operating the tractor and dozer require the combined use of these controls and additional controls whose operation is described in the tractor Operator’s Manual.

A. Angling Control Lever

The angling control lever is used to change the angle of the dozer blade.

While the engine is running, moving the lever forward rotates the blade counterclockwise. Moving the lever back rotates the blade clockwise.

B. Attachment Lift

The attachment lift pedals (see inset above) raise and lower attachments such as the dozer blade.

To RAISE an attachment, depress the REAR attachment lift pedal. To LOWER an attachment, depress the FRONT attachment lift pedal.

C. Two-Speed Control

The two-speed control (see inset above) allows the opera- tor to switch the transmission into high or low-speeds, and to disengage the transmission into a NEUTRAL (free- wheeling) position.

Select the low-speed for all Dozing work and high- speed for travelling to and from work areas. DO NOT SHIFT WHILE MOVING. See the Tractor Operator’s Manual for more details.

TRACTOR CONTROLS

Before you begin operating the tractor with the dozer blade attachment, make certain you have:

•Read and understood the instructions in the tractor Operator’s Manual.

•Become thoroughly familiar with all of the tractor controls and their operation, including how to safely and properly start and stop the unit.

•Practiced driving in an open area—without dozing—to become accustomed to the unit.

3