OPERATION
INSTALLING BATTERY PACK
See Figure 4 - 5.
nLock the switch trigger on the drill by placing the direction of rotation
nPlace battery pack in the drill. Align raised rib on battery pack with the groove inside the drill.
nMake sure the latches on each side of your battery pack snap in place and battery pack is secured in the drill before beginning operation.
CAUTION:
When placing battery pack in the tool, be sure raised rib on battery pack aligns with the bottom of the drill and latches into place properly. Improper installation of the battery pack can cause damage to internal components.
REMOVING BATTERY PACK
See Figure 4 - 5.
nLock the switch trigger on the drill by placing the direction of rotation selector in center position.
nLocate latches on side of battery pack and depress to release battery pack from the drill.
nThe battery pack will automatically disconnect in direction to be removed when buttons are depressed.
nRemove the battery pack from the drill.
WARNING:
Battery tools are always in operating condition. Therefore, switch should always be locked when not in use or carrying at your side.
SWITCH TRIGGER
See Figure 6.
To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger.
VARIABLE SPEED
See Figure 6.
This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression.
FORWARD/REVERSE/LOCK OFF
SELECTOR
Fig. 4
DEPRESS LATCHES TO
RELEASE BATTERY PACK
Fig. 5
VARIABLE SPEED
SWITCH TRIGGER
Fig. 6
12
