MAINTENANCE

WARNING:

When servicing use only identical RIDGID® replacement parts. Use of any other parts may create a hazard or cause product damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.

WARNING:

To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at a RIDGID authorized service center.

BATTERIES

This tool will accept RIDGID18 V lithium-ion batteries or

BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING

RIDGID 18 V nickel-cadmium batteries. Length of service from each charging will depend on the type of work you are doing.

The batteries for this tool have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, we suggest the following:

Li - Ion

To preserve natural resources, please recycle or dispose of batteries properly.

This product uses lithium-ion or nickel- cadmium batteries. Local, state or federal laws may prohibit disposal of batteries in ordinary trash.

Consult your local waste authority for information regarding available recycling and/or disposal options.

For lithium-ion batteries:

Remove the battery pack from the charger once it is fully charged and ready for use.

For battery pack storage longer than 30 days:

Store the battery pack where the temperature is below 80°F and away from moisture.

Store battery packs in a 30%-50% charged condition.

Every six months of storage, charge the pack as normal.

For nickel-cadmium batteries:

Remove the battery pack from the charger once it is fully charged and ready for use.

For battery pack storage longer than 30 days:

Store the battery pack where the temperature is below 80°F.

Store battery packs in a “discharged” condition.

WARNING:

Upon removal, cover the battery pack’s terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Lithium-ion and nickel- cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

15

Page 14 Page 16
Page 15
Image 15
RIDGID R86006 manual General Maintenance, Batteries, Battery Pack Removal and Preparation for Recycling
Page 14 Page 16

R86006 specifications

The RIDGID R86006 is a powerful 18V cordless brushless impact driver designed to meet the rigorous demands of both professional contractors and DIY enthusiasts. Known for its robust construction and advanced capabilities, this tool stands out in its category, offering a blend of performance, versatility, and durability.

The first notable feature of the R86006 is its brushless motor, which provides enhanced efficiency compared to traditional brushed motors. This technology not only extends battery life but also reduces wear and tear, improving the overall lifespan of the tool. With an impressive torque rating, the R86006 can handle a variety of fastening applications, allowing users to complete tasks efficiently.

Equipped with a variable speed trigger, this impact driver allows for precise control over speed and power. Users can easily adjust the performance to suit different materials and applications, making it a versatile choice for tasks ranging from driving screws into wood to fastening bolts in metal surfaces. The integrated LED work light adds to its practicality, illuminating dark work areas and enhancing visibility for increased productivity.

The R86006 features a 1/4-inch quick change hex chuck, enabling rapid and tool-free bit changes. This convenience is ideal for professionals on the go, allowing them to switch bits quickly without the need for additional tools.

Another key characteristic of the RIDGID R86006 is its ergonomic design. The tool is lightweight and features a comfortable grip, reducing fatigue during extended use. This thoughtful design promotes user comfort while maintaining control, ensuring accuracy and efficiency in every task.

Moreover, the R86006 is part of RIDGID's 18V platform, meaning it is compatible with the entire line of RIDGID 18V batteries and chargers. This compatibility provides users with the flexibility to switch batteries across tools, reducing downtime and maximizing productivity.

In summary, the RIDGID R86006 is a feature-packed impact driver that combines advanced brushless technology, user-friendly design, and impressive performance. Whether tackling heavy-duty applications or simple projects at home, this tool proves to be an invaluable addition to any toolkit. Its reliability, efficiency, and ergonomic characteristics make it a top choice for those demanding peak performance in their power tools.
Top Page Image Contents