General Safety Rules, Work Area, Electrical Safety

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create a risk of fire.

Use battery only with charger listed.

MODEL	BATTERY PACK (Li-ion)	CHARGER

R86006	R84008 (130383002)	R840091
R86006	R840084 (130383001)	(140276006)
	R840084 (130383001)	(140276006)

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is in the locked or off position before inserting battery pack. Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch on invites accidents.

Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

Do not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be drawn into air vents.

Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the tool in unexpected situations.

TOOL USE AND CARE

Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect battery pack from tool or place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of injury when used on another tool.

Keep the tool and its handle dry, clean and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your tool. Following this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.

R86006 specifications

The RIDGID R86006 is a powerful 18V cordless brushless impact driver designed to meet the rigorous demands of both professional contractors and DIY enthusiasts. Known for its robust construction and advanced capabilities, this tool stands out in its category, offering a blend of performance, versatility, and durability.

The first notable feature of the R86006 is its brushless motor, which provides enhanced efficiency compared to traditional brushed motors. This technology not only extends battery life but also reduces wear and tear, improving the overall lifespan of the tool. With an impressive torque rating, the R86006 can handle a variety of fastening applications, allowing users to complete tasks efficiently.

Equipped with a variable speed trigger, this impact driver allows for precise control over speed and power. Users can easily adjust the performance to suit different materials and applications, making it a versatile choice for tasks ranging from driving screws into wood to fastening bolts in metal surfaces. The integrated LED work light adds to its practicality, illuminating dark work areas and enhancing visibility for increased productivity.

The R86006 features a 1/4-inch quick change hex chuck, enabling rapid and tool-free bit changes. This convenience is ideal for professionals on the go, allowing them to switch bits quickly without the need for additional tools.

Another key characteristic of the RIDGID R86006 is its ergonomic design. The tool is lightweight and features a comfortable grip, reducing fatigue during extended use. This thoughtful design promotes user comfort while maintaining control, ensuring accuracy and efficiency in every task.

Moreover, the R86006 is part of RIDGID's 18V platform, meaning it is compatible with the entire line of RIDGID 18V batteries and chargers. This compatibility provides users with the flexibility to switch batteries across tools, reducing downtime and maximizing productivity.

In summary, the RIDGID R86006 is a feature-packed impact driver that combines advanced brushless technology, user-friendly design, and impressive performance. Whether tackling heavy-duty applications or simple projects at home, this tool proves to be an invaluable addition to any toolkit. Its reliability, efficiency, and ergonomic characteristics make it a top choice for those demanding peak performance in their power tools.

RIDGID R86006 manual General Safety Rules, Work Area, Electrical Safety, Personal Safety

Models: R86006