R
Type of Appliance Rinnai model number Operation
Minimum/Maximum Gas Rate (Input) Electrical
Electrical Consumption
Ignition System Hot Water Capacity Temperature
Temperature (without controller) Approved Gas Types Installation
Thermal Efficiency
Service Connections
Water Flow Control
Minimum/Maximum Water Supply Pressure
R98eASME (V3237W-ASME)
This model has been built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code and has received the Certificate of Authorization from the National Board. The heat exchanger has the NB and the HLW stamps.
Temperature controlled, continuous flow, gas hot water system
Forced combustion
19,000 - 237,000 BTU/h (Natural Gas or Propane)
Appliance: | AC 120 Volts - 60 Hz |
Controller: | DC 12 Volts |
Normal | 72 watts |
Standby | 2 watts |
116 watts | |
Direct electronic ignition |
|
0.6 to 8.0 GPM (50° F rise) | 0.9 to 9.8 GPM (35° F rise) |
98° - 140° F |
|
120° F (factory default) |
|
Natural or Propane (ensure unit matches gas type)
Outdoor only |
|
Natural Gas: 85% | Propane: 83% |
Gas supply: 3/4 inch MNPT
Cold water inlet: 3/4 inch MNPT
Hot water outlet: 3/4 inch MNPT
Water flow sensor, electronic water control and
15 - 150 PSI (50 PSI or above is recommended for maximum flow)
FLOW TABLE
Water Flow Capacity Curve
© 2008 Rinnai Corporation | 4/2008 |