ritetemp 6030 manual Program

Program PG 7

NOTE: 60 Second Rule-Duringprogramming, if a button is not pushed in 60 seconds, the unit will return to the home screen. Everything you have changed while programming will automatically be saved.

Select HEAT with the HEAT/Cool MODE switch.

Press PROGRAM to go to the programming screen.

Select the day you want to program-

Touch the Day of the week area to cycle through the days of the week to select the desired day.

Select the time slot you want to program - Touch the Time slot area to cycle through the 4 time slots, until it displays the desired time slot.

Select the time of day -
Touch the Time of Day arrows to move the time	Backward Forward
selection forward or backward until it displays the
desired time. Touch and hold for faster time set.

Program cont.

Select the desired temperature -

Touch the UP temp / Down temp arrows.

Repeat the above procedures for each day of the week and each time slot of the day as desired.

To REVIEW your program touch REVIEW. Each time slot for each day or set of identical days, will be displayed every 3 seconds.

Return HOME by touching the home icon.

To COPY the program from the current day to another day - Touch COPY on the program screen. The current day will remain solid, the destination day will flash.

Touch the day area to advance the day and select a copy destination. Touch COPY again to copy all settings to the destination day.

To program for cooling -
Select COOL with the Heat/Cool MODE switch and repeat the	PG 8
above procedure.