Rival 1060-C warranty How To Clean Your Slicer Continued

Figure 5

1060C05EM1 P.qxd 2/26/05 11:16 AM Page 11

HOW TO CLEAN YOUR SLICER

CAUTION: Blade is sharp. Handle carefully. Do not wash blade in dishwasher. Do not immerse main unit in water. Do not remove lubricant from the gears.

1. Always unplug the appliance and let the Blade come to a complete stop before cleaning.

2. Adjust the Thickness Knob to setting ‘O’ before cleaning.

3.To clean the Blade, hold the Blade by one hand and use a coin to unlock the Blade-Locking Nut by turning it clock-wise (Fig 5). Remove the Blade by gripping the hole portion of the Blade.

4.The Blade, Food Press Plate, Feeder, and Food Tray should be hand washed and

dried immediately. Use caution when cleaning the Blade, it is extremely sharp. Do not touch the sharp edge.

The Blade should not be left to soak in water. Wash, rinse, and dry Blade immediately. Install Blade in main unit after it has dried.

NOTE: The white lubricant on the gears of the Blade and Motor assembly is used to reduce the friction and noise of the gears. It should not be removed. If removed, the life of the gears and cutting performance will be limited and the noise will increase. In case of total removal of lubricant, food grade lubricant may be applied. Never apply industrial-use or automobile use lubricant to the gears.

5.Clean the outer surface of the main unit with a damp cloth. It is recommended to clean the main unit with the Blade removed. Never immerse the main unit in water.

HOW TO CLEAN YOUR SLICER (CONTINUED)

6.After cleaning, install the Blade and Blade-Locking Nut on main unit in reverse order of Step 3. Make sure the Blade-Locking Knob is properly engaged. Remember to turn the Thickness Adjustment Knob to setting ‘O’.

CAUTION: Do not disassemble Slicer, other than stated in the above cleaning instructions.

-6- -7-