HOW TO USE YOUR DEEP FRYER (CONTINUED)
4.Make sure that fryer is off and insert plug into 120 volt AC outlet.
5.Turn fryer to desired temperature position. The Power Indicator will illuminate. The Ready Indicator will illuminate when the oil has reached the preset temperature.
6.Using your slotted spoon, place food inside the fryer (Do not over stack food). Close Lid until it snaps into place. Overloading will lower the oil temperature, causing food to absorb too much oil and cook improperly.
7.For cooking times, see chart on page 8, or use the recommended times in your recipe.
8.As your food fries, open lid and stir slowly with slotted spoon or other
9.Once the food reaches desired brownness, using your spoon, lift and drain. Set the drained food on several layers of paper towels to absorb excess oil. Season if desired. To fry more servings, repeat steps
WARNING: DO NOT USE THE POWER CORD SYSTEM
5, 6, 7, 8 and 9. SureRELEASETM
TO DISCONNECT THE FRYER. ALWAYS DISCONNECT PLUG FROM WALL OUTLET FIRST TO DISCONNECTFRYER.
Use only Model PL1215 magnetic cord set with this product. The use of any other magnSureRELEASEtic cord setTMmay cause fire, electric shock, or injury.
CAUTION: Thepower cord is only for accidental discon- nection and not to be removed during normal operation. If the cord becomes disconnected, the user should immediately unplug the cord set from the wall outlet, then reconnect the magnetic cord to the deep fryer and then to the wall outlet.
