USING YOUR DEEP FRYER
NOTE: Never turn on the fryer with an empty Oil Reservoir. Always use your fryer on a flat, heat resistantsurface.
1.Attach magnetic end of SureRELEASE™cord assembly directly to the fryer. This should be done prior to pluggingthe cord into the wall outlet. The magnetic end of the cord is designed only to go on one way. Be sure the side stating “THIS SIDE UP” is facing up.
2.Open Lid by pressing Open Lid.
3.Remove Frying Basket by pulling Basket Handle up.
4.Make sure the Oil Reservoiris seated in place with the basket hook on the side opposite of the Control Panel. Pour cooking oil into Oil Reservoir until it reaches between “MIN” and “MAX” marks inside reservoir.DO NOT OVER OR UNDER FILL.
5.Place Lid onto the unit by placing it on the hinge guides at the back of the fryer.
6.Make sure that fryer is OFF and insert plug into 120 volt AC outlet.
7.Turnfryer to desired temperatureposition.
8.TurnTimer knob to "ON" position. Power Light will turn on.
9.Ready light will turn on when oil is
10.Place food inside Frying Basket (Do not over stack food). Place Lid back onto the unit and close. Lower Frying Basket into Oil Reservoir.
CAUTION: Always replace and close Lid before immersingfood in oil. Do not immerse or drain food with Lid removed or open.
11.Turntimer knob to desired time.
12.After time is up a bell with sound. Lift Frying Basket and hang basket onto basket hook in Oil Reservoir. To remove excess grease and retain crispness, let food drain in Frying Basket at least
