%100'%6+0)6*'&%8+0,#%-
To power the amplifier from your vehicle’s 12V battery, plug the supplied DC power cable’s barrel plug to the DC 12V IN jack, and then connect the other end to your vehicle’s 12V accessory socket, such as a
4'2.#%+0)6*'&%219'4 %14&
5(75'
If the amplifier does not operate from a 12V battery source, check the fuse in the cigarette lighter plug. If the fuse is blown, remove the cap of the plug and replace the fuse with the proper type and rating (6A/250V).
12'4#6+10
Follow these steps to use your amplifier.
1.Set the ON/OFF switch to the ON position.
2.Start the input sound source.
3.Set MASTER VOLUME approximately to the
4.Adjust the following controls to the desired volume and balance: MIC 1, MIC 2,
PHONO/AUX, 100Hz, 1kHz, 8 kHz
5.After you get the desired balance, adjust the MASTER VOLUME to the desired volume level.
/10+614+0)6*'5170&5174%'5
To monitor the sound sources, insert the
.+56'0+0)5#('.;
To protect your hearing, follow these guidelines.
•Always start by setting the volume to the lowest level possible before you begin listening.
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
| ..CAUTION.. |
| ! |
RISK OF ELECTRIC SHOCK | |||
| DO NOT OPEN |
| |
|
|
|
|
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO
The lightning symbol is intended to alert you to the presence of uninsulated dangerous voltage within this product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.
The exclamation symbol is intended to inform you that important operating and maintenance
!instructions are included in the literature accompanying this product.
%#76+10
•Your vehicle must have a negative ground electrical system. If you are not sure, check with your vehicle dealer.
•Unplug the AC power cord before you connect the DC power cable. Likewise, disconnect the DC power cable before you plug in the AC power cord.
Operation
Operation
±016'±
15
