Roberts Radio 32-2054 owner manual 100%6+017452#-45+0 54+52#4#...%1/$+0#6+10, ±016±

Follow these steps to connect two speakers in parallel.

1.Connect both speaker’s negative (-) terminals to each other. Then, connect both wires to the amplifier’s COM terminal.

2.Connect both speakers’ positive (+) terminals

to each other. Then, connect both wires to the amplifier’s speaker terminal (4 Ω , 8 Ω , or 16 Ω ) that matches the total speaker impedance.

%100'%6+0)￿(174￿52'#-'45￿+0￿ 5'4+'5￿2#4#..'.￿%1/$+0#6+10

Follow these steps to combine series and parallel combinations±.

1.Group the four speakers into two pairs.

2.Connect each pair of speakers in series. If you connected 8-ohm speakers, the total impedance of each pair is 16 ohms (8+8 = 16).

Connections

±￿016'￿±￿

If each of the four speakers is 8 ohms, the total speaker impedance of the combined series/parallel connection described at right is also 8 ohms. Likewise, the total speaker impedance is 4 or 16 ohms if the speakers are 4 or 16 ohms, respectively.

11