If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Listening to cassette tapes
Note: This unit is not suitable for recording onto CHROME (IEC II) or
METAL (IEC IV) cassettes. For playback any cassette type may be used
1. Set the Function switch to the 'Tape' position.
2. Press the Stop eject button to open the Cassette compartment.
3. Insert a pre-recorded cassette with the tape surface downwards and
the side with the desired recording facing towards you.
4. Close the Cassette compartment.
5. Depress the Play button and adjust the Volume control to suit your
personal taste.
6. Set the Spatial sound and DSC controls to the required positions
7. Use the Fast forward or Rewind buttons to locate a specific part of
the tape.
8. If you wish to temporarily stop the playback depress the Pause
button. When you are ready to resume playback press the Pause
button a second time.
9. To stop the tape press the Stop/Eject button.
Function
Radio
CD
Tape
1
Play Rewind F. Forward Stop/Eject Pause
2
5
7
78
9
Play Rewind F. Forward Stop/Eject Pause
Volume
5
SPATIAL
SOUND
6
6
16
cd9912 instruction book.PMD 4/21/2004, 11:15 AM17