Dynamic Range Control settings - DAB
Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when your radio is used in a noisy environment.
1.Press the On/Off button to switch on your radio.
2.Press and hold in the Info button. The display will show 'Manual tune.'
3.Press the Tuning Up or Down buttons until the display shows 'DRC'.
4.Press and release the Select button to enter the adjustment mode.
5.Press the Tuning Up or Down buttons to select the required DRC setting (the default is 0).
DRC 0 - DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 - DRC level is set to 1/2 that sent by broadcaster.
DRC 1 - DRC level is used as sent by broadcaster.
6.Press and release the Select button to confi rm the setting. The chosen setting will be marked with an asterisk. The display will return to normal tuning mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the broadcast does not support DRC, then the DRC setting in the radio will have no effect.
1
2
3,5
3,5
4,6
11