Roberts Radio CR2002 manual Troubleshooting, Specifications

Troubleshooting

1. If the time does not set automatically it may be necessary to rotate your clock radio to a position giving better reception of the MSF signal.

2. It is recommended that your clock radio is placed as far away as 3

possible from any sources of interference such as computers or televisions, etc.

3.To re-synchronise with the MSF time signal, press and hold down the

time button (4 seconds) until the MSF indicator begins to

flash. The MSF indicator will continue to flash whilst synchronisation takes place. Synchronisation is complete when the MSF indicator stops flashing.

At certain times of the year the MSF transmitter closes down for maintenance. During this time the clock will not automatically set. Recorded information on transmitter status can be obtained on 020 8943 6493.

Specifications

Power Requirements			Headphone socket	3.5mm dia
Mains	AC 230 volts, 50Hz		only
			Aerial System FM	Wire aerial
Frequency Coverage
	FM	87.5-108MHz	MW	Built-in Ferrite aerial
	MW	522- 1629kHz
	LW	153- 279kHz	LW	Built-in Ferrite aerial
Loudspeaker	75mm x 100mm 8ohms
Output Power	800 mW

21