Roberts Radio CR9902 Setting the alarms to wake to buzzer, Setting the alarms to wake to radio

Setting the alarms to wake to buzzer

1. Set the alarm time as previously described. Set theFunction switch

to the 'Buzz' position. Set the Alarm selector switch to the '1 ',

' 2 ' or '1 + 2 ' position. The corresponding Alarm indicators will light.

The buzzer alarm will sound every day at the preset time for 59 minutes. To turn off the alarm until the next day press the Alarm/Off button. To turn off the alarms permanently set the Function switch to the 'Off' position.

To make a distinction between alarm 1 and alarm 2 the alarm signals have a different sound pitch:

Alarm 1 = lower pitch alarm signal

Alarm 2 = higher pitch alarm signal

O ff B u z z A u to O n 1 2 1 + 2

P M

1 2

Setting the alarms to wake to radio

1.Set the alarm time as previously described. Set theFunction switch

to the 'Auto' position. Set theAlarm selector switch to the '1 ', ' 2 ' or '1 + 2 ' position. The corresponding Alarm indicators will light.

Ensure that the volume is set to the correct level and the desired station is tuned in.

The radio alarm will operate every day at the preset time for 59 minutes. To turn off the radio alarm until the next day press the Alarm/ Off button. To turn off the alarms permanently set the Function switch to the 'Off' position.

Note: If an alarm time has not been set and the Function switch is left in the 'Buzz' or 'Auto' position, the buzzer or radio will operate at 12:00 midnight. If you do not require the alarm function, ensure that the Function switch is set to the 'Off' position.

O ff B u z z A u to O n 1 2 1 + 2

P M

1 2

7