Switching on
1.Place your clock radio on a flat surface. Plug the mains lead into a wall socket and switch on. Note your clock radio will not switch on until the clock has been set.
2.The Time Capsule will automatically activate the Radio Controlled clock and initiate a search for the time signal. When first connected to the mains supply the MSF signal indicator shows the MSF signal level. Rotate the Time Capsule or change its position until the highest signal level is obtained.
3.In most locations the time capsule can be placed behind a bedside cupboard out of sight. If necessary the Time Capsule can be secured to the cupboard using the double sided tape provided. If a more permanent installation is required the base of the Time Capsule can be snapped open at the split line - the base can then be secured using two small screws. The top section can then be snapped back onto the base.
4.We recommended that your clock radio and Time Capsule are placed as far away as possible from any sources of interference such as computers or televisions, etc.
5.When your Time Capsule is receiving the radio time signal, the seconds digits will appear in the display and the colon will flash once every second in time with the radio time signal. When the time setting process has been completed, the exact time and day of the week will appear in the display. The MSF signal indicator becomes the Day of week indicator after initial time setting has taken place.
6.Your clock radio will automatically switch from summer to winter time and vice versa by following the radio time signal. The Automatic summer time indicator will light up during summer time.
ON
WeekendCancel Sun Mon Tue Wed Thu Fri Sat
MSF Signal |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
Auto
Summer
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
6
