Listening to the Radio
1. Switch on the radio by pressing the On/Off button . The LED dial |
| LW | 150 | 170 | 200 230 260 280 | kHz | ||||
pointer will light up indicating that the radio is switched on. |
| MW | 540 | 600 | 700 | 900 | 1200 | 1600 | kHz | |
Note your clock radio will not switch on until the clock has been |
| |||||||||
|
|
|
|
|
|
|
|
|
| |
set. | On/Off | FM | 88 | 92 |
| 96 | 100 104 106 | 108 | MHz | |
|
|
|
|
|
|
|
|
|
| |
2. Select the required waveband using the Waveband selector switch.
MW FM
3.Tune in to the desired station by rotating the Tuning control. The station frequency is indicated by the LED dial pointer.
The Wire aerial located on the rear of your clock radio is for FM reception. The wire should be fully extended and positioned for optimum reception.
LW | 150 | 170 | 200 | 230 260 280 | kHz | |||
MW | 540 | 600 | 700 | 900 | 1200 | 1600 | kHz | |
For MW reception there is a built in ferrite aerial. Rotate your clockFM 88 92 96 100 104 106 108 MHz radio to the position giving best reception.
Tuning
4. Adjust the volume by rotating the Volume control.
Volume
5. The radio can be switched off by pressing the On/Off button.
On/Off
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
8
